KAPPA PRO-12A
| SPECIFICATION | |
| Nominal Basket Diameter | 12", 304.8mm |
| Nominal Impedance* | 8 ohms |
| Power Rating** | |
| Watts | 500W |
| Music Program | 1000W |
| Resonance | 37Hz |
| Usable Frequency Range | 57Hz - 2.8kHz |
| Sensitivity*** | 97.1dB |
| Magnet Weight | 80 oz. |
| Gap Height | 0.37", 9.53mm |
| Voice Coil Diameter | 3", 76.2mm |
Aero 12A
| Features |
|---|
|
-Powered two-way, mid-high line array module The Aero 12A compact line array system joins the Aero Series2 family of professional sound touring products. The system incorporates an impressive battery of high tech features that take compact line array systems to an unprecedented level of performance. The two-way amplifier design of the Aero 12A sets a new industry benchmark in audio performance, efficiency and power density. The 600 W amplifier provides extended bandwidth, improved dynamic range and exceptionally low distortion. Impressively compact in size and light in weight, its high power density of over 20 W per cubic inch promotes an amplifier design that requires much less space, reducing the overall cabinet size and in turn, the total cabinet weight-an important attribute for flown systems. Signal processing is accomplished by way of a powerful 24 bit DSP providing unparalleled control over critical signal parameters. Digital Finite Impulse Response (FIR) filters are used in the signal processing of the Aero 12A. The Aero 12A incorporates a D.A.S. 12LN4C, 12″ low frequency transducer employing a 75 mm (3″) voice coil and neodymium magnet motor assembly. High frequency reproduction relies on the exceptional characteristics of the new D.A.S. M-75N neodymium compression driver designed for use in applications where high SPL and low distortion are required. A pure titanium diaphragm featuring a 75 mm copper-clad, aluminium flat-wire voice coil yields high sensitivity, low distortion and extended frequency response. The easily portable and rugged enclosure is manufactured using birch plywood and finished with a durable black paint. The captive rigging system splay angles range from 0º to 10º and can be adjusted in 0.5º increments from 0º to 3º and 1º increments from 3º to 10 º allowing a wide range of column curvatures to be accomplished. |
| Technical Data | |
|---|---|
| Nominal HF Amplifier Power | 100 W |
| Nominal MF Amplifier Power | 500 W |
| Frequency Range (-10 dB) | 63 Hz-20 kHz |
| Rated Peak SPL at 1 m | 134 dB |
| Horizontal Coverage (-6 dB) | 90º Nominal |
| Vertical Coverage | Splay Dependent |
| Enclosure Material | Birch Plywood |
| Color/Finish | Black/Paint |
| Connectors |
Input: Female XLR Loop Thru: Male XLR AC Input: PowerCon NAC3 AC Output: PowerCon NAC3 |
| AC Requirements |
115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 1.7A |
| Dimensions (H x W x D) |
31.6 x 68.8 x 38.5 cm 12.4 x 27 x 15.2 in |
| Weight | 27 kg (59.4 lb) |
XMP1
The XPM1 is a compact DC powered microphone preamplifier offering 50dB of adjustable gain and phantom power.
Designed for project studio recording environments, and boasting excellent technical specifications, the XPM1 is ideal for a wide variety of applications.
With an extremely compact form factor, rugged steel chassis, and high quality components, the XPM1 is sure to provide years of trouble free operation under the most challenging conditions.
The XPM1 features both XLR and TRS jack inputs on the front panel allowing for the connection of all types of microphones. The switchable 12V phantom power facilitates the powering of condenser microphones.
For home/project studio situations - Most home studio PC soundcards simply do not have a microphone preamplifier. If you need to do a microphone recording for a podcast, home video voice over, or any other multimedia task, the XPM1 is perfect for direct connection to the line inputs of your soundcard.
Each of the CQ15’s two channels features 15 bands (2/3-octave) of EQ with selectable ±6dB/±12dB range. The compressors—available pre- or post-EQ (and featuring true circuit bypass)—suit a variety of tasks, from harnessing troublesome peaks to putting a tight low end on a stereo DJ mix.
PRE8 : 8 CHANNEL MICROPHONE PREAMP
Tailored to suit a wide variety of applications, the PR8E is perfectly suited for use as a front-end device for many hard disk recording systems, as well as adding additional mic pre's to digital mixers and sound cards.
Each pre-amp features it's own XLR/TRS jack 'Combo' input connector, 48v phantom power switch for the mic-pre and a built-in -20dB pad in the 1/4" (6.5mm) TRS line-in jack sockets. Individual phase reversal switches are provided next to the eight balanced 1/4" (6.5mm) TRS output sockets on the rear panel. All this is housed inside a hardened steel chassis, complete with rack mounting panels.
Each mic-pre provides some 60dB of gain with a massive 23db of maximum output! Ultimately however, the quest is about sound quality. To this end, the PR8E is certainly designed to deliver and will outperform just about any other device in it’s class.
DSP-2060A
| Features |
|---|
|
-2 inputs and 6 outputs The DSP-2060A is a powerful DSP based audio processor, ideally suited for install and live applications, where it combines the functions of a multitud of conventional products in a compact unit. |
| Technical Data | |
|---|---|
| Frequency Response |
20 Hz-20 kHz, +0/-0.50 dB 32 kHz, -3 dB |
| Dynamic Range | >116 dB unweighted 20 Hz-20 kHz |
| Distortion (THD) | <0.02% @ 1 kHz, +18 dBm |
| AC Requirements | 60-250 VAC 50/60 Hz |
| Dimensions (H x W x D) |
4.4 x 48.2 x 30 cm 1.75 x 19 x 11.8 in |
| Weight | 3.3 kg (7.3 lb) |
DR-512A
| Features |
|---|
|
-Powered 2-way, full-range system The powered DR-512A combines design with function in a medium size enclosure. It´s unique enclosure offers an oversized handle for easy carrying, will accept a standard 35 mm mounting stand and includes a floor monitor position for added flexibility. Built-in rigging points and an optional mounting bracket facilitates use in permanent installations. The DR-512A incorporates the latest in amplifier technology. A Class “D” amplifier that offers an impressive 1000 W peak power. Protection circuitry is provided for both amps and the components. |
| Technical Data | |
|---|---|
| Nominal Amplifier Power |
1000 W peak, 500 W continuous Class D, Biamplified |
| Frequency Range (-10 dB) | 50 Hz - 20 kHz |
| Rated Peak SPL at 1 m | 131 dB |
| Dispersion | 90º x 45º |
| Enclosure Material | Polypropylene |
| Color/Finish | Black |
| Connectors |
INPUT: Female XLR LOOP THRU: Male XLR AC INPUT: Male IEC |
| AC Requirements |
115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 1.2 A |
| Dimensions (H x W x D) |
62 x 40 x 37 cm 24 x 16 x 14.5 in |
| Weight | 18.1 kg (39.9 lb) |
DR-515A
| Features |
|---|
|
-Powered 2-way, full-range system The DR-515A exemplifies the achievements of D.A.S. engineers in high pressure injection molding technology. The DR-515A mounts a proprietary 15” low frequency transducer and the high efficiency M-34 compression driver and CD horn assembly. The DR-515A incorporates the latest in amplifier technology. A twin cahnnel Class “D” amplifier powers the low frequency section for a total output of 1000 W peak power. |
| Technical Data | |
|---|---|
| Nominal Amplifier Power |
1000 W peak, 500 W continuous Class D, Biamplified |
| Frequency Range (-10 dB) | 45 Hz - 20 kHz |
| Rated Peak SPL at 1 m | 131 dB |
| Dispersion | 90º x 45º |
| Enclosure Material | Polypropylene |
| Color/Finish | Black |
| Connectors |
INPUT: Female XLR |
| AC Requirements |
115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz |
| Current Draw (1/3 power @ 230 V) | 1.5 A |
| Dimensions (H x W x D) |
71 x 46 x 42 cm 28 x 18 x 16.5 in |
| Weight | 20.1 kg (44.3 lb) |
Action M12A
| Features |
|---|
|
-2-way powered stage monitor system The "low profile" enclosure design is made from Birch plywood and finsihed with a durable black paint. A 35 mm pole mount socket widens the versatility of the Action M12A monitor. |
| Technical Data | |
|---|---|
| Amplifier Power |
1000 W, peak, 500 W continuous Class D, Biamplified |
| Frequency Range (-10 dB) | 60 Hz - 20 kHz |
| Rated Peak SPL at 1 m | 130 dB |
| Dispersion | 80º x 50º |
| Enclosure Material | Birch Plywood |
| Color/Finish | Black/Paint |
| Connectors |
INPUT: Female XLR LOOP THRU: Male XLR AC INPUT: Male IEC |
| AC Requirements |
115 V, 2.4 A, 50 Hz/60 Hz 230 V, 1.2 A , 50 Hz/60 Hz |
| Dimensions (H x W x D) |
42 x 64.5 x 31.6 cm 16.6 x 25.4 x 12.5 in |
| Weight | 19 kg (41.8 lb) |
Action 12A
| Features |
|---|
|
-Compact multi-purpose system with monitor position The Action 12A offers a multi-angle enclosure which allows it to be used in stage monitor applications as well as a compact P.A. system. The 1000 W peak power of the Class D amplifier provides extended bandwith, improved dynamic range and exceptionally low distortion-features hard to find on other systems in this market segment. The Mi-12A D.A.S. loudspeaker provides accurate low frequency reproduction. High frequencies are handled by the M-34 compression driver with 1″ exit and titanium diaphragm offering excellent performance. |
| Technical Data | |
|---|---|
| Amplifier Power |
1000 W peak, 500 W continuous Class D, Biamplified |
| Frequency Range (-10 dB) | 50 Hz - 20 kHz |
| Rated Peak SPL at 1 m | 131 dB |
| Dispersion | 80º x 50º |
| Enclosure Material | Birch Plywood |
| Color/Finish | Black/Paint |
| Connectors |
INPUT: Female XLR LOOP THRU: Male XLR AC INPUT: Male IEC |
| AC Requirements |
115 V, 2.4 A, 50 Hz/60 Hz 230 V, 1.2 A, 50 Hz/60 Hz |
| Dimensions (H x W x D) |
65.3 x 37.8 x 32.4 cm 25.7 x 14.9 x 12.8 in |
| Weight | 20 kg (44 lb) |